Вот новое фото появилось: Я спрашивал на их форуме в чем отличие от g5 вот ответ: Gyro and accel sensors are now built on a single chip. BTW, the new G6 does have a third voltage sensor. This one is wired to the BEC voltage servo rail. It will display a warning if the voltage goes bellow 4.5V. I had several reports of crash caused because people are using the built in linear BEC on many ESCs. If overloaded the voltage does drop and cause the regulator to overheat and eventually shut down. So If you notice the BEC warning in flight, try keeping all servos as much centered as possible, only move the basic controls very gently and please make sure to land ASAP. You need to use an external BEC or more current capability on the new one. Hopefully this feature will save quite few models. Похоже особенно не в чем, кроме LRS (которой нет)
